AL1304 1.3G 4W

AL1304 1.3G 4W is an analog FPV video transmitter in the 1080–1360 MHz range, listed with 4 W maximum output power. Its published input voltage is 7–30 V. Compare exact channels, connectors and system requirements before pairing equipment.

Frequency range1080–1360 MHz
Output power4 W
Input voltage7–30 V
Product familyFPV VTX
Enquire about this model→
PRODUCT DATA

Specifications at a glance.

Use these values to narrow your selection. Confirm the current hardware configuration and exact channel table with VYRLUME.

Compare the Shrimp B AL1304 1.3G 4W analog FPV video transmitter VTX against your aircraft and ground equipment. The 1.3G model is listed for 1080–1360 MHz and 4 W maximum RF output power. Its published channel count is 16. The listed control protocol is IRC Tramp. Check the exact channel table, video interface, supply and installation dimensions before ordering; the band name or power rating alone cannot establish link compatibility. Compare FPV video transmitters →

ProductAL1304 1.3G 4W
TypeAnalog video transmitter
Frequency range1080–1360 MHz
Output power4 W
Input voltage7–30 V
BrandShrimp B
Channels16
Selectable powerPIT / 25 mW / 200 mW / 1 W / 4 W
Control protocolIRC Tramp
Dimensions44 × 28.6 × 14.7 mm
Weight25.3 g
A shared band name alone does not confirm compatibility. Compare exact channels, video format and connections before installation.
INSTALLATION CHECKS

Connect. Configure. Check.

01Match frequency with the other end of the link.
02Confirm supply voltage and polarity.
03Check antenna and video interfaces.
04Allow for mounting and cooling.
PRODUCT FAQ

Questions about AL1304 1.3G 4W.

Published specifications for this model, with the key checks to make before installation.

01What frequency range does AL1304 1.3G 4W use?

AL1304 1.3G 4W is listed for 1080–1360 MHz. The published specification lists 16 channels. Match the exact channel frequency and video format with the other end of the link before installation.

02What output power does AL1304 1.3G 4W offer?

The published selectable settings are PIT / 25 mW / 200 mW / 1 W / 4 W. The model is listed at up to 4 W; check the setting, cooling and applicable local rules for your setup.

03What input voltage does AL1304 1.3G 4W require?

The published input range is 7–30 V. Confirm polarity and the power supply's capacity before connecting the unit.

04Which connections should I check for AL1304 1.3G 4W?

The published control protocol is IRC Tramp. Verify the matching wiring, connector and antenna frequency range for your setup.

05What space should I allow for AL1304 1.3G 4W?

The listed dimensions are 44 × 28.6 × 14.7 mm. The listed weight is 25.3 g. Allow clearance for cables, the antenna and cooling airflow.

06What should I verify before installing AL1304 1.3G 4W?

Check the exact channel table, video and antenna connections, supply polarity, mounting clearance and cooling requirements for the current hardware revision.

START A CONVERSATION

Discuss AL1304 1.3G 4W.

Discuss a catalogue model or contract manufacturing brief. Share your setup, quantity and timing.

Make an enquiry→