1 / 8AKK Alpha 10
AKK Alpha 10 is an analog FPV video transmitter in the 4990–5945 MHz range, listed with 10 W maximum output power. Its published input voltage is 12–28 V. Compare exact channels, connectors and system requirements before pairing equipment.
Specifications at a glance.
Use these values to narrow your selection. Confirm the current hardware configuration and exact channel table with VYRLUME.
Compare the AKK Alpha 10 analog FPV video transmitter VTX against your aircraft and ground equipment. This model is listed for 4990–5945 MHz and 10 W maximum RF output power. Its published channel count is 80. The listed antenna connector is SMA. The listed control protocol is SmartAudio. Check the exact channel table, video interface, supply and installation dimensions before ordering; the band name or power rating alone cannot establish link compatibility. Compare FPV video transmitters →
| Product | AKK Alpha 10 |
| Type | Analog video transmitter |
| Frequency range | 4990–5945 MHz |
| Output power | 10 W |
| Input voltage | 12–28 V |
| Brand | AKK |
| Channels | 80 |
| Selectable power | 1 W / 3 W / 5 W / 7 W / 10 W |
| Control protocol | SmartAudio |
| Antenna connector | SMA |
| Camera power output | 5 V |
| Mounting holes | 30.5 × 30.5 mm |
| Dimensions | 68 × 36 × 15 mm |
| Weight | 48 g |
Connect. Configure. Check.
Questions about AKK Alpha 10.
Published specifications for this model, with the key checks to make before installation.
01What frequency range does AKK Alpha 10 use?
AKK Alpha 10 is listed for 4990–5945 MHz. The published specification lists 80 channels. Match the exact channel frequency and video format with the other end of the link before installation.
02What output power does AKK Alpha 10 offer?
The published selectable settings are 1 W / 3 W / 5 W / 7 W / 10 W. The model is listed at up to 10 W; check the setting, cooling and applicable local rules for your setup.
03What input voltage does AKK Alpha 10 require?
The published input range is 12–28 V. Confirm polarity and the power supply's capacity before connecting the unit.
04Which connections should I check for AKK Alpha 10?
The published control protocol is SmartAudio. The antenna connector is SMA. Verify the matching wiring, connector and antenna frequency range for your setup.
05What space should I allow for AKK Alpha 10?
The listed dimensions are 68 × 36 × 15 mm. The listed weight is 48 g. The mounting hole spacing is 30.5 × 30.5 mm. Allow clearance for cables, the antenna and cooling airflow.
06What should I verify before installing AKK Alpha 10?
Check the exact channel table, video and antenna connections, supply polarity, mounting clearance and cooling requirements for the current hardware revision.
Discuss AKK Alpha 10.
Discuss a catalogue model or contract manufacturing brief. Share your setup, quantity and timing.