Onboard camera
Select an analog camera and confirm its video signal and connector match the VTX input. Check the view through turns and gates during setup.

Plan an analog FPV video setup for racing and freestyle, with camera compatibility, transmitter output, channel coordination, mounting and cooling in mind.
The pilot needs a clear, timely view through turns, gates and rolls.
AL5805 5.8G 5W offers selectable output; check mounting space, supply and cooling for the aircraft.
Coordinate channel assignments before multiple pilots fly together.
Each component affects the complete analog FPV video link. Check the interfaces and operating requirements at every step before choosing equipment for racing & freestyle.
Select an analog camera and confirm its video signal and connector match the VTX input. Check the view through turns and gates during setup.
The AL5805 5.8G 5W offers selectable output settings. Compare its 7–30 V input, 44 × 28.6 × 14.7 mm size and cooling needs with the airframe.
Match the exact channel frequency and coordinate assignments when multiple pilots fly. Check antenna coverage and test for interference at the venue.
Connect a compatible receiver and verify the image before flying. Confirm the display, antennas and power remain secure through the planned course.

4875–6060 MHz · 5 W · 7–30 V. Explore the product details and compare them with the complete system.
View product→Practical answers about equipment selection, compatibility and the limits of this example setup.
Nearby video links can interfere when channels are too close or incorrectly assigned. Coordinate the exact frequencies used by each transmitter and receiver before multiple pilots fly.
The published settings are PIT, 25 mW, 200 mW, 1 W and 5 W. Choose a setting appropriate to the venue, cooling and applicable local rules.
Its listed dimensions are 44 × 28.6 × 14.7 mm and weight is 25.3 g. Check the frame mount, cable clearance, antenna location and airflow before installation.
The published input range is 7–30 V. Check the full battery or regulator voltage range and polarity against the current product documentation.
Discuss a catalogue model or contract manufacturing brief. Share your setup, quantity and timing.